Electrofunken Guitars Electrofunken Electrical Instruments Electrofunken Guitar Electrofunken hand made Electrofunken Guitars Electrofunken Electrofunken Electrical Instruments

EL-96 Specs.

"Perfection by design".

Body
Body material Padouk, Korina, Koa or Maple
Body construction Semi-hollow
Body dimensions 17" x 12" x 2"
Top material Flame, Curley, or Birdseye Maple
Top construction Flat or sculpted one piece or three piece "flitch" matched.
Top dimensions .25" thick
Binding Painted.
Neck
Neck material Padouk, Korina or Maple.
Neck construction Two piece luthier adjoined headstock. Glued and bolted in.
Fingerboard material Birdseye Maple
Nut dimensions 1.75" wide
Frets Dunlop #
Inlays Painted
Truss rod Double expanding. Headstock end adjustment
Hardware
Bridge material Zinc
Bridge design Custom
Tremolo material Brass
Tremolo Design Custom
Output jack Neutrik locking
Tuners Gotoh locking - low mass.
   
Paint
Body Nitrocellulose lacquer
Neck Acrylic lacquer
Electronics
H2C Pickup System Two humbucker system.
H2C Pickup Settings Position one -position two - position three - position four - position five
S2C Pickup System Two single coil pickups
S2C Pickup Settings Position one -position two - position three - position four - position five
S3C Pickup System Three single coil system.
S3C Pickup Settings Position one -position two - position three - position four - position five
Controls Series / Parallel "blade" switch with One volume control.
Synth options GK2A Kit (and or) RMC system
Dimensions
Scale length 25.5"
Guitar length 37"
Guitar width 12"
Case
Custom Custom design
Case dimensions  
Strap
Custom One supplied with guitar. Custom length at customer's request.
Cable
Lawrence One supplied with guitar. Choice of 10 / 15 / 20 / 25 / 30 Feet lengths.

 


 

Copyright Electrofunken Electrical Instruments 2010. All rights reserved.

 

 

Electrofunken Guitars Electrofunken Electrical Instruments Electrofunken Guitar Electrofunken hand made Electrofunken Guitars Electrofunken Electrofunken Electrical Instruments